Video duration: 29 seconds
Global video hits: 674172
I started building these cells early in 2008 and have since redirected my efforts toward developing the electronics necessary to make them work as described for fuel injected engines.
Video duration: 224 seconds
Global video hits: 2098
The Creative Evolution CNC HSD-500 is used for high speed EDM graphite electrode milling and hard steel insert milling for molds and dies. This hard insert replaced the EDM process with a more accurate part in less time.
Video duration: 119 seconds
Global video hits: 6602
8yrs Hyundai trajet 2000cc consumption 6km/liter without hho.installed 7tubes hydrogen generator running 5amp with pwM, Plain tap water (no soda) , EFIE setting + 200mv,Install cylinder top lubricator spraying high temp. lubricant mist into air intake and air mixer between filter and trottle body.
hydrogen hose entrance between filter and trottle body. result is 8km/liter
Video duration: 75 seconds
Global video hits: 36194
Better hydrongen production compared to my other experimental electrode. Smaller tube is 1/4"x 4" and bigger tube is 1/2" grade 316 Stainless steel wall 1/32" thick.
consumed 13vdc 1.6amp, container diameter= 3" the disc rings holding the tube are 2" dia.
will install this unit into my car and step up the voltage to 200vdc
